+32 2 559 77 22
User Guide – MEMOLUB® Visio
Precautions
- Do not open the housing: loaded spring;
- Hold MEMOLUB® down during manual checks;
- Leq <70 dB
- Use MEMOLUB® only for greasing machinery;
- Use only lubricant cartridges and batteries recommended by the manufacturer;
Technical informations
Please download the user guide for the following informations:
- Setting and Installation;
- Electric specifications;
- Remote installation;
- Installation with distributor;
- Dimensions;
- Mounting view;
- Temperature exposure range.
Dimensions
Setting and installation
Memolub® Visio 120 cc
| Wheel position | Dosing period (time between strokes) | Refilling frequency vs Cartridge content |
|---|---|---|
| 0 | External | |
| 1 | 24 h | 6 months |
| 2 | 16 h | 4 months |
| 3 | 12 h | 3 months |
| 4 | 8 h | 2 months |
| 5 | 4 h | 1 month |
| 6 | 2 h | 15 days |
| 7 | 1 h | 7 days |
| 8 | 0,5 h | – |
| 9 | 0,25 h | – |
Memolub® Visio 240 cc
| Wheel position | Dosing period (time between strokes) | Refilling frequency vs Cartridge content |
|---|---|---|
| 0 | External | |
| 1 | 24 h | 12 months |
| 2 | 16 h | 8 months |
| 3 | 12 h | 6 months |
| 4 | 8 h | 4 months |
| 5 | 4 h | 2 months |
| 6 | 2 h | 1 month |
| 7 | 1 h | 15 days |
| 8 | 0,5 h | 7 days |
| 9 | 0,25 h | – |
Memolub® Visio 480 cc
| Wheel position | Dosing period (time between strokes) | Refilling frequency vs Cartridge content |
|---|---|---|
| 0 | External | |
| 1 | 24 h | NA |
| 2 | 16 h | NA |
| 3 | 12 h | 12 months |
| 4 | 8 h | 8 months |
| 5 | 4 h | 4 months |
| 6 | 2 h | 2 months |
| 7 | 1 h | 1 month |
| 8 | 0,5 h | 15 days |
| 9 | 0,25 h | 7 days |
Warning signal (LED light)
| Parameter | Situation | Color |
|---|---|---|
| Gearbox-Motor | Damaged – Broken |  Red |
| Battery | Empty |  Yellow |
| Vibration / T°/Pump | Abnormal — Vacum problem |  Blue |
| Touchpad | Test |  Green |
Replacing cartridge
Only for MEMOLUB® VISIO EP: Disconnect the power plug
Open (fingers on ribs)
Prime MEMOLUB®
Insert new battery pack and seal
Squeeze air out of cartridge
Replace cartridge
Close and lock (fingers on ribs)
Direct installation
Prime lube point and remove nipple
Screw in Memo using threadlocker
Choose the dosing setting
Install MEMOLUB® on the base module
Only for MEMOLUB® VISIO EP: Connect the power plug
Check with the touchpad
Remote installation
Prime lube point and remove nipple
Secure bracket
Install the base module and F1/4 fitting
Screw BSP 1/8 fitting
Cut hose to required size
Insert hose into quick fitting
Insert hose into quick fitting
Choose the dosing setting
Install MEMOLUB® on the base module
Only for MEMOLUB® VISIO EP: Connect the power plug
Check with the touchpad
Installation with distributor block
Prime lube point and remove nipple
Secure bracket
Install the base module and F1/4 fitting
Screw BSP 1/8 fitting
Cut hose to required size
Insert hoses into quick fittings
Insert hoses into quick fitting
Choose the dosing setting
Install MEMOLUB® on the base module
Only for MEMOLUB® VISIO EP: Connect the power plug
Check with the touchpad
Check Function
Check with the touchpad
Check regularly
版权 2024 米曼® (MEMOLUB®)
|
网站设计 Generis
|
网站技术支持 